Firstly: when choosing a basketball stand, it is important to pay attention to the height standard of the basketball stand. Generally, the height is about 3.05 meters, which is suitable for personnel use. For some special purposes such as purchasing for children, other stands should be selected based on their height ratio. Basketball stands height.

Secondly: when selecting a basketball frame, attention should be paid to its workmanship, especially the edges of the basket. A smooth surface should be chosen. If it is rough, it will cause wear and tear on the hands of tall people when hooking the basketball frame. When selecting a basketball basket, it is required that its area can accommodate two basketball sizes at the same time, and the basketball basket should not be too hard. If it is too hard, it will be difficult to throw the ball.

Thirdly: In addition, the box of the basketball stand is the center of gravity of the entire basketball stands, with counterweights inside. The length of the box is generally 1.8-2 meters. The installation position is determined based on the arm length of the basketball stand. The longer the extended arm, the larger the required rear area. The extended arm length of a general basketball stand is 1.8 meters, which means that the distance between the box and the bottom line is 600mm, and the width of the court should be sufficient for installation.

Fourth: When purchasing fiberglass backboards, it is necessary to pay attention to checking whether there are cracks on the surface of the fiberglass, and whether the bolt holes are also sealed with resin. This is because the interior of the fiberglass backboards is mostly multi-layer wooden boards covered by resin materials on the surface, and the sealing is generally not tight. If rainwater enters the interior, it can cause decay, foaming, and other situations, which can cause damage to the backboards. The thickness of fiberglass backboards is usually 30mm.